Shop Categories

Product Details

 Nokia 5110 Arduino LCD dsiplay Module Red
Nokia 5110 Arduino LCD dsiplay Module Red
MPN :
SKU : N5110LCD-H27
Stock : Out of Stock
Price:PKR 350.00
Product Details:
Nokia 5110 LCD Module
Condition: New
Positioning hole for four corners
Provide two row terminals, red screen
Interface: serial SPI
Color as pictures
PLS NOTE that due to lighting effects, monitor's brightness/ contrass settings ect, there could be some slight differences in the color tone of the pictures and the actual item!

Parameters
1>.Power supply voltage:2.7-3.3V
2>.Data interface level:2.7-3.3V
3>.Backlight power supply voltage:highest 3.3V
4>.Module size:43.6mm x 43.1mm(width X height)
5>.Installation diameter:2mm

Connection
1>.RST--------- reset
2>.CE---------- chip selection
3>.DC---------- data/commands choice
4>.DIN--------- serial data line
5>.CLK--------- serial Clock Speed
6>.3.3V-------- VCC
7>.LIGHT------- backlight control terminal
8>.GND--------- power negative

Features:
1>. 84 X 84 dot matrix LCD,can show 4 lines of characters
2>. Use serial interface communicate with the master processor,the number of interface signal line reduced greatly, only 8 signal lines including power and GND.Support different types of MCU,such as the arduino,AVR,PIC,STM32,STC MSP430 and so on.Transfer rate up to 4Mbps,can full speed write display data without waiting time.
3>. Can use the conductive glue to connect the module with the printed board,without connecting cable.The metal hooks on the module can fix the module on the printed board,which is very easy to install and replace.
4>. LCD controller/driver chip has been bound to LCD chip,the volume of LCD is small
5>. Low power supply,the working current in normal situation is lower than 200?A,and has power-down mode


Package Included:
1/2/3/5 x Nokia 5110 LCD Module
  • Google Checkout
  • Master Card
  • Paypal
  • Acc
  • Acc2
  • Visa

Copyright © 2014, All rights reserved.