Shop Categories

Product Details

 5V 1A Micro USB Lithium Battery Charging TP4056 balance Charger 18650 Protection
5V 1A Micro USB Lithium Battery Charging TP4056 balance Charger 18650 Protection
MPN :
SKU : USBCHG02-H40
Brand :Megatronics.pk
Stock : 277pcs
Price:PKR 80.00
5V 1A Micro USB Lithium Battery Charging Board TP4056 balance Charger Module


Note: The first time you access the battery, it may no voltage between the output OUT + and OUT-, then access 5V voltage charge your energy can activate the protection circuit, and the battery from the B+ B-, then draw a line on the short open also need recharged to activate the protection circuit. Note that the charger must be able to output 1A or more to do when using a mobile phone charger input, or may not charge.


+ MICRO USB female and next - pads for the power input, access 5V. B + positive then the lithium battery, B- then negative lithium batteries. OUT + and OUT- connected to the load, such as positive and negative electrodes connected mobile booster plate or other load.


Connect the battery to the B + B-, inserted into the USB female mobile phone charger, the red light is being charged, the green light to full.


Product Introduction:
1.Input Voltage: 5V Micro USB 
2.Charging Cut-Off Voltage: 4.2V±1%
3.Maximum Charging Current: 1000mA
4.Overdischarging Protection Voltage: 2.5V
5.Overcurret Protection Current: 3A
6.Board Size: 2.6*1.7cm


Notice:
1. Testing Current Meter can only serial connect with charging board 5V input port
2. Charging current should be battery capacity 0.37C,that is 0.37 times
3. Charging connecting cable should not be too thin and long
4. Make Sure that connecting with battery perfectly
5. If 5V input voltage is a little high, such as 5.2V or 5.5V,it will cause charging current cannot reach 1000MA.This is normal phenomenon.
6. Input transposition hasn't impact on chip; but output transposition will burn the chip

Hot Offers

7x9cm DIY Prototype wire vero board PCB Universal Board

7x9cm DIY Prototype wire vero board PCB Universal Board


PKR 60

Items Discontinued

Items Discontinued


PKR 900

Items Discontinued

Items Discontinued


PKR 2500

Neck hanging belt strap for RC remote control

Neck hanging belt strap for RC remote control


PKR 120

Mini Drill Chuck 3.17-1.5 bit holder Brass Electric Motor Shaft Clamp

Mini Drill Chuck 3.17-1.5 bit holder Brass Electric Motor Shaft Clamp


PKR 200

Featured Products

3.7V DC 35000RPM 0610 Mini Coreless Motor Tiny quadcopter small motor

3.7V DC 35000RPM 0610 Mini Coreless Motor Tiny quadcopter small motor


PKR 120

FlySky FS-R6B 2.4G AFHDS 6 Channel Receiver

FlySky FS-R6B 2.4G AFHDS 6 Channel Receiver


PKR 4800

Air pump motor DC 4-6V self-priming vacuum pump

Air pump motor DC 4-6V self-priming vacuum pump


PKR 420

63/37 tin wire Rosin core solder wire 100g 0.8mm soldering wire with lead Solder

63/37 tin wire Rosin core solder wire 100g 0.8mm soldering wire with lead Solder


PKR 600

1A DRV8833 Dual Motor Driver Module Full-bridge Driver 3D printer CNC 4A peak

1A DRV8833 Dual Motor Driver Module Full-bridge Driver 3D printer CNC 4A peak


PKR 300

  • Google Checkout
  • Master Card
  • Paypal
  • Acc
  • Acc2
  • Visa

Company Policies

Orders & Deliveries

Site Information

Copyright © 2014, All rights reserved.