Click on the following link for product video demo presentation. https://youtu.be/ullRLXb9tFY

1 Channel 433Mhz learning code Wireless Relay RF Remote Control Receiver

DESCRIPTION

 Input Voltage: DC10-14V
 Standby Current: <5MA
 RF Frequency: 433MHZ
 RF Working mode: Super heterodyne receiver
  Receiver Sensitivity: >90dBm
  Remote Control Distance: >100 meter (In open environment)
 Decoding Way: MCU Software decoding
 Can store the number of remote control: 50
  Support remote control type: Fixed code, learning code
 Channel: 1CH
  Multiple working modes: (Jog/Non-Latched, inter-lock/Latched, self-lock /Self-Latched, Delay off)
 Wiring Method: Fixed wiring terminal

 Working Voltage: DC12V
 Output Current: 10A
Rated load: 10A 250VAC / 10A 125VAC / 10A 30VDC / 10A 28VDC

Output: Normally open, Common, Normally closed
Dimension: 3.5cm*3cm*1.6cm

Working/output way

  Jog/Non-Latched: Press one button is Working /ON. Loosen your finger on the same button is Stop/OFF. One channel switch need one buttons remote control.

  Self -lock/Self-Latched: Press one button for one time is working/ON. Press the same button again is stop/OFF. One channel switch need one buttons remote control.

  Inter-lock /Latched: Press one button is working/ON, press another button is stop/OFF. One channel switch need 2 buttons remote control.

  Delay: Press remote control relay pull-in, release the remote control and begin timekeeping, after 5s,10s,15s will automatically close the relay

Description

  Press the learning code .the indicator flash, loosen your finger ,press any button of the remote control

  The indicator flash 2 times and off .it mean you learn it successfully.

  It can learn more than 12 PCS 2262 or 1527 chip with the different code wireless 433MHz remote control

  Remove/clean: press the learning button about 8 seconds, the indicator turn on to off, it means the information that you keep have been removed successfully .