Shop Categories

Product Details

 TP4056 Type-C USB Li-ion 18650 Battery Charger 5V
TP4056 Type-C USB Li-ion 18650 Battery Charger 5V
Stock : 158pcs
Price:PKR 120.00
Click on the following link for product video demo presentation.

TP4056 Type-C USB Li-ion 18650 Battery Charger 5V 1A Module Charging Board with Protection Dual Functions

Input interface: Type-c USB
The board size: about 2.5 * 1.65 CM
Charge cut-off voltage: 4.2 V + / - 1%
Battery overcharge lifting voltage: 4.00 V
Battery discharge termination voltage: 3.2 V
Battery: over-current protection current 3 A
Maximum charging current output: 1000 ma
The battery discharge protection voltage: 3.0 V
The battery overcharge protection voltage: 4.28 V
The input voltage: 4.35-6V (recommended voltage 5V)

When the battery is connected for the first time, there may be no voltage output between OUT + and OUT-. At this time, connect the 5V voltage and charge it to activate the protection circuit. If the battery is shorted from B + B- and then connected A charge is required to activate the protection circuit. When using a mobile phone charger as input, please note that the charger must be able to output 1A or above, otherwise it may not charge normally
The TYPE C USB socket and the +-pad next to it are the power input terminal, which is connected to 5V voltage. B + is connected to the positive electrode of the lithium battery, and B- is connected to the negative electrode of the lithium battery. OUT + and OUT- are connected to the load, such as the positive and negative poles of the mobile booster board or other loads.

Connect the battery to B + B-, insert the mobile phone charger to the USB socket, the red light is charging, and the blue light is full.
  • Google Checkout
  • Master Card
  • Paypal
  • Acc
  • Acc2
  • Visa

Copyright © 2014, All rights reserved.