80W High-power laser engraver head blue-violet light cutting laser head laser 80W fixed-focus laser


Advantage 1:
Air Assist System: When performing laser cutting work, an air assist system blows air through the air nozzle, increasing cutting performance and reducing burn marks. You can remove the air assist nozzle when you are doing non-cutter work. This laser kit only comes with an air assist nozzle, to make full use of the air assist feature, you may need to prepare an air assist pump and air tubing yourself.


Advantage 2:
Laser Protective Cover: It can effectively filter blue light and can work without wearing protective glasses.


Main performance
A. Directly engrave stainless steel mirror: no need to paint black;
B. Super fast engraving speed: 304 stainless steel, up to 30mm/s with 45mm focus length;
C. Remarkable Cutting Capability: Cutting through 8-10mm thickness plywood by one pass at the speed of 1.5mm/s
Diode [diodo original]
Original diode, high quality, 20,000 hours life!


Easy to use
Wavelength: 450nm, input: dc 12v 3.2a, support 5v pwm modulation, input port: XH2.54-3P socket, control line installation method: pluggable. Suitable for DIY engraving machine.


Materials [applicable materials]
Ceramic, bone, mdf, coated glass, black acrylic, plywood, brushed stainless steel, stone, bamboo, leather, rubber, alumina, solid wood, etc.


Precautions
Unable to engrave: blue/purple/white/transparent material, aluminum without oxide layer.


Important tip! ! !
1. The red line is the 12V positive pole, the black line is the negative pole, and the yellow PWM line is the positive pole (0-5/12V, 0-20KHz). If the pwm of your control board exceeds 5v/12v, it will not be able to control the pwm adjustment of the laser.


2. Use a laser with a nozzle to cut the wood, etc. it is recommended to use it with an air pump to blow out smoke. After many times of cutting work, the smoke will pollute the lens and affect the engraving effect. Please use alcohol wipes to clean the lens.


3. In the maximum cutting thickness data we showed, the wood is pine board / basswood board. Maximum laser cut thickness is affected by wood density and material.


4. 80w is the collective name of laser manufacturers, it does not mean that the input and output power is 80w. 


Laser type: semiconductor blue light
Shell material: aviation aluminum
Module center material: copper
80w actual output power: 10-11w
Laser Size: 40mm
Laser wavelength: 450nm
Supply voltage: 12v
Power Control: PWM/TTL (Voltage 0-5V)
Beam Shape: Spot Shape Fixed Focus (It comes with a 40mm focusing column, so when you do laser work, please confirm the distance from lens to material is 40mm)
The lifetime is 20000 hours (due to different engraving materials, the smoke produced by engraving will adhere to the lens. To avoid affecting the engraving effect, it is recommended to use a fan)