220V Smart Thermostat Temperature Controller Socket Outlet with Timer Switch Sensor Probe Digital Heating Cooling Control


The external temperature detector can detect the temperature
Set the start and stop temperature
Cycle timing, start and stop time, timer switch
It is widely used in intelligent control, such as carbon heating, aquaculture,greenhouse, home life and other places.
 
Temperature range: -40~120°C
 
Open circuit (or less than -40°C), the first row of the screen flashes display ''E1'', -40~-45°C, display -40°C
Short circuit( or more than 120°C ), the first row of the screen flashes displaty ''E2'', 121-129°C display  120°C
Lower than -10°C, or higher than 100°C, it will not display value behind the decimal point
Refrigeration mode, start temperature > Stop temperature
Heating mode, start temperature < stop temperature
 
 Mode button
 Press MODE. LCD display: temperature control mode
Timing mode F01-F04
F01 Cycling timing mode, start time(ON)/stop time(OFF) cycling timing.
F02 Count down ON mode, now Ti.s OFF, delayed(start time) ON
F03 Count down OFF mode, now Ti.s ON, delayed(stop time) OFF, countdown completion, turn off the output and exit the run
F04 Count down ON Count down OFF mode, now Ti.s OFF, delayed(start time) ON, After starting delayed ( Stop time )OFF, Stop the time to finish the countdown, close out the output and exit the operation
 
Temperature correction function 
 
Long press mode button on electricity, real time temperature  calibration after 2 seconds
Real time temperature correction range: -9.9~9.9°C
Long press the SET for 5 seconds to automatically exit, do not save modification
Long press MODE button to exit, save the cuttent correction modification
 
Screen lock protection function
 
Press the RESET to restore the screen for one second, and restore the factory settings.
 
Long press MODE for 5 seconds, Then the heating or the coolling mode will flash, then it can work
 
 
Memory function after power off .