PicKit 3.5+ PIC Kit3.5+ Programmer for PIC Microcontrollers Programming Simulation


The PICkit3.5+ Universal Programmer allows debugging and programming of PIC and dsPIC Flash microcontrollers using the powerful graphical user interface of the MPLAB Integrated Development Environment (IDE) This is an upgrade from the Pickit 3 programmer with the programming to go feature.


Each PICkit3.5 with a unique serial number, in MPLAB X under, can operate multiple Kit3.5
Erase of program memory space with verification
MPLAB IDE compatible (free download from Microchip)
The firmware is never lost, firmware can be self-healing, to avoid demolition case
Offline programming never crash, so download more smoothly and completely conquer all versions of MPLAB, MPLAB X


This is PICkit 3.5 development tools that have built-in drivers for high-speed USB communication.
PICkit3.5 is an online development and download development tool designed by Microchip for beginners to learn, evaluate, and develop PIC MCUs. PICkit 3.5 In-Circuit Debugger/Programmer is compatible with Microchip uses in-circuit debugging logic incorporated into each chip with Flash memory to provide a low-cost hardware debugger and programmer. The PICkit3.5 allows debugging and programming of PIC and dsPIC Flash microcontrollers using the powerful graphical user interface of the MPLAB Integrated Development Environment (IDE).


PICkit3.5 includes the advantages of more stable simulation, more models, and faster than PICkit2. It can support PIC16 PIC18 PIC24 DSPIC and other MCU simulation and download.


PICKit3.5 Compatible is used for programming the Microchip PIC10F, PIC12F, PIC16F, PIC18F, PIC24F, dsPIC30, dsPIC33 family with MPLAB X IDE and MPLAB IPE software. PICKit3 offers unprecedented level of performance, reliability and scalability for PIC programmer solution with ICSP (In-Circuit Serial Programming) method.


How to use the software:


Connect PICkit3 to the ICSP connector and start the application.
Now from the Device Family tab select the PIC18 and choose the Device from the dropdown menu.
Load the hex file by going File->Import Hex.
Then Use the Write button to burn the code to the PIC microcontroller.


Note:
Because the PIC's ICSP interface has only one row of 6PIN connectors, when you are going to connect the PICkit3.5 to the PIC target board, you should pay attention to the left and right direction of the connection.
In order to avoid burning the PICkit3 downloader, Do not insert it backward.


PICKit 3.5 programmer Application:
8-bit Devices - PIC10F/12F/16F
PIC10F/12F/16F5X
PIC16F6xx
PIC16F7XX
PIC16F8XX
PIC16F9XX
PIC16F1XXX
8-bit Devices - PIC18F
PIC18CXX/FXX
PIC18F1XXX
PIC18F2XXX/4XXX/6XXX/8XXX
PIC18FXXJ
PIC18FXXK
16-bit Devices
dsPIC30F/33F, PIC24F/H
32-bit Devices
PIC32MX


Status of the PICkit3 LED:


Power:
Green, lights when power is on or connected to the target board.
Active:
Blue, lit when PICkit3 has established communication with the PC or sent/received a command.
Status:
Green, on when the debugger is operating normally (standby).
ellow, lights up when the operation is busy.
Red, lit when debugger fails.
USB (Full speed 12 Mbits/s interface to host PC)
Real-time execution
MPLAB IDE compatible (free download from Microchip)
Built-in over-voltage/short circuit monitor
Firmware upgradeable from PC/web download
Totally enclosed
Diagnostic LEDs (power, busy, error)
Read/write program and data memory of the microcontroller
Erase of program memory space with verification
Freeze-peripherals at breakpoint
Program up to 512K byte flash with the Programmer-to-Go
ICSP cable included
Port: mini USB
Input Voltage: 2V ~ 6V
Pin Number: 6 Pins
Pinout:
VPP/MCLR
VDD
VSS
ICSPDAT/PGD
ICSPCLK/PGC
LVP


ICkit 3.5 debugger Items:
1 x PICKIT3.5 Microchip Programmer
1 x Mini USB Cable
1 x 6-Pin Flat Cable